Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Granite Falls, WA

Deck Restoration & Staining for Cedar in Granite Falls, WA

Low-pressure wash for cedar. Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer. Typical cost $800-$2,500.

From the free quote to the final rinse, deck restoration & staining for cedar in Granite Falls, WA follows a simple process: inspect, protect, clean, rinse and check. On cedar, the method we use is low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually 500-800 PSI; cedar is soft and marks easilyPressure

Cleaning solution: A wood cleaner and brightener suited to cedar.

What to know about cleaning cedar

Cedar decks and fences turn silver-gray as the surface weathers. Gentle cleaning with a wood cleaner and brightener brings back the color, and a penetrating stain keeps it longer.

Avoid: High pressure, which gouges the soft wood and raises the grain.

How often: Clean yearly; refinish every 2-3 years.

Is it time for deck restoration & staining for cedar?

  • Stain peeling, flaking or worn through in traffic areas
  • Gray wood that soaks up water
  • Cracking, splitting or splinters
  • Black spots that come back after washing

Why it gets dirty

  • UV breaking down the stain and wood surface
  • Film-forming stains that peel instead of wearing
  • Water standing on boards
  • Mildew feeding on old finish

Easy upkeep between cleanings

  • Do the 'water drop test': if water soaks in instead of beading, the wood needs sealing
  • Replace or fasten loose boards and popped nails first
  • Keep the deck clean between finishes

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Stain over dirty or damp wood, which peels quickly
  • Stripping with too much pressure
  • Mixing incompatible old and new stains
  • Staining in direct hot sun, which leaves lap marks

What happens on the day

  1. Inspect the deck and the old finish and choose a stain with you
  2. Clean or strip the old finish
  3. Brighten the wood and let it dry fully
  4. Sand rough spots where needed
  5. Apply a penetrating stain or sealer and allow it to cure

Typical deck restoration & staining for cedar prices

$800-$2,500Typical range for a typical 200-400 sq ft deck with rails
1-2 days including dry timeTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for cedar

Deck Restoration & Staining for Cedar in Granite Falls, WA

Wood decks and fences in Washington grow moss and mildew and can rot where moisture sits. Clean them every year and refinish during the dry summer.

We provide deck restoration & staining for cedar across Granite Falls (ZIP code 98252) and nearby towns including Lochsloy (3.7 mi), Sisco Heights (6.3 mi), Lake Stevens (6.5 mi) and West Lake Stevens (8.8 mi). Call (877) 658-5887 for a free quote in Granite Falls.

Deck Restoration & Staining for Cedar: frequently asked questions

How much does deck restoration & staining for cedar cost in Granite Falls, WA?

Deck Restoration & Staining for Cedar typically costs $800-$2,500 for a typical 200-400 sq ft deck with rails, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for deck restoration & staining for cedar?

For cedar: usually 500-800 PSI; cedar is soft and marks easily. What we avoid: high pressure, which gouges the soft wood and raises the grain. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck restoration & staining for cedar safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck restoration & staining for cedar?

Clean yearly; refinish every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Granite Falls, WA

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Stucco Cleaning

Stucco and EIFS soft washing that removes green and black growth, dirt and rust stains without damaging the finish.

Typical $300-$800

Patio Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$400

Pool Deck Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$500

Soft Washing for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $300-$800

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Pre-Paint Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $250-$600

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote in Granite Falls, WA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote